AquaticLife 420141 Spezifikationen PDF herunterladen (Seite 7)

DUAL-LAMP T5 HO INSTALLATION

4) Drive the two right sides of the Metal

Attachment into left side of the second

ﬁxture (non power cord side).

5) Repeat steps on other end of ﬁxture (power cord side).

6) Attach Aquarium Frame Mounts prior to placing End Plates on Fixture.

7) After Metal Attachment is connecting both (or three) ﬁxtures, place the left End Plate

(power cord side) on the ﬁxture.

8) Place second End Plate on the ﬁxture.

NOTE: Make sure to route power cord

through lower hole in End Plate

NOTE: Some of the removable punches

on the plastic End Plate(s) will need to be

removed to route the power cords through

the End Plate(s). How many will depend

on the amount of ﬁxtures connected

together.

NOTE: The Aquatic Life Dual Lamp Fixture

can have up to three ﬁxtures connected

together. If connecting three ﬁxtures, refer

to the previous instructions to connect the

third ﬁxture.

NOTE: Prior to connecting multiple light

ﬁxtures, remove all packaging materials

from the ﬁxtures and insert the lamps

into place as described previously. Also

remove the Aquarium Frame Mounts.

MULTIPLE FIXTURES

The Aquatic Life Dual Lamp Fixture is able to attach to another Aquatic Life Dual Lamp ﬁxture.

Ultimately, three Dual Lamp Light Fixtures can be connected together to form a six lamp ﬁxture.

1) Remove Left and Right End Plates from both ﬁxtures (Refer to pg. 5).

2) Remove Left and Right Metal Attachments from both ﬁxtures (Refer to pg. 6).

3) Drive the two left side screws of the Metal Attachment into the right side of the ﬁrst ﬁxture

(non power cord side).

Tools required for installation:

Philips #2 Screwdriver

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

AquaticLife 420141 Spezifikationen Seite 7